Toate
Cuvinte-cheie produs
Introduceți adresa de e-mail a contului
Alfawise C30 Pro 3000mw cu laser masina de gravat 460 x 360mm Large Area mare precizie simplă Cadru cu laser gravor
Share to:

Alfawise C30 Pro 3000mw cu laser masina de gravat 460 x 360mm Large Area mare precizie simplă Cadru cu laser gravor

- Negru
464390601

Gravură Zona Super mare, de mare intensitate cu laser, 0.01mm Precizie, personalizabil Plăci de bază
4.55 11 Recenzii de la clienți | Please refer to English description
189.99 $205.52 8% reducere
  • TRANSPORT GRATUIT
    COD Plata la livrare este disponibila pentru acest produs (COD). Nota: Pot fi adaugate mai multe produse intr-o singura comanda. Pentru a putea plati la livrare, adauga in cos doar produse cu eticheta COD. Valoarea totala a comenzii trebuie sa fie cuprinsa intre 80 si 400 LEI.
    Expediere între: Apr 13 - Apr 23, Timp de expediere estimat: zile lucrătoare Durata de procesare a comenzii poate fi de câteva zile. După livrarea din magazie, durata de expediere (sau livrare) depinde de metoda de expediere.
  • +
  • fără dobândă Puteți beneficia de maximum 0 rate fără dobândă, iar această ofertă nu se aplică atunci când plasați comenzi împreună cu alte produse
Informații taxe Protecția prețului Declinare privind prețurile Repair Warranty Report Item
lichidare
Produse recomandate pentru dvs.
Clienții care au cumpărat acest articol au mai cumpărat

Alfawise C30 Pro Descrieri

De mare putere cu laser masina de gravat
Alfawise C30 Pro este o mare putere masina de gravat cu laser, care vă permit poate sculpta modele pe suprafața de materiale diferite. zona de gravura Actualizate ajunge la 460 x 360mm, care este mai flexibil și convenabil pentru a sculpta. Acesta este cel mai bun dispozitiv vă pentru un proiect DIY.

Caracteristici principale:
460 x 360mm zonă mare de gravura, satisface toate tipurile de nevoi
3000mw laser de mare intensitate, poate sapi materiale diferite, inclusivlemn, plastic, hârtie, bambus, bou corn, hârtie din piele, burete, etc
Deschideți placa de baza structurii cu ace rezervate pentru auto-dezvoltare și de potrivire
Modul cu laser înlocuibil, Se pot instala alte module pentru a obține putere cu laser diferite
● Șoferul și nano pe placa de baza sunt detașabile, pot fi înlocuite cu alte chips-uri sau module
● aluminiu si corp acrilic cu manopera fin
● Mediu montat inițial componente cu o calitate stabilă
● Vine cuochelari de cal de siguranță pentru a proteja ochii de la un prejudiciu cu laser
● Ușor de asamblat de proiectare

Specificații:
Putere laser: 3000mw
gravură Dimensiune: 460 x 360mm
Precizie: 0.01mm
material suport: lemn, plastic, hârtie, bambus, Ox Horn, piele, burete de hârtie, etc.
Sistem de suport: sindows XP / Win 7 / Win 8 / Win10 / Linux
Format fișier: jpg, bmp, SVG, G-cod
software de suport: Benbox / GRBL

Specificație

General

Marca: Alfawise
Număr de model: C30 Pro
Tip: Cu laser masina de gravat
Material: Aliaj de aluminiu
Lungimea de undă laser (nm): 445nm
Puterea laserului: 3000mw
Intervalul de atingere a laserului: 3000mw
Putere prin: Stecher

Dimensiuni și greutate

Greutatea produsului: 4.0000 kg
Greutatea pachetului: 4.6000 kg
Dimensiunea produsului (L x W x H): 60,00 x 50,00 x 10,00 cm / 23,62 x 19,69 x 3,94 țoli
Dimensiunea ambalajului (L x L x Î): 77,50 x 27,00 x 11,50 cm / 30.51 x 10.63 x 4.53 inchi

Conținutul pachetului

Conținutul pachetului: 1 x laser gravorului 1 x Alimentare, 1 x Modul laser, 1 x ochelari de protecție, 1 x Manual de limba engleză, 1 x TF card
Alfawise C30 Pro 3000mw cu laser masina de gravat 460 x 360mm Large Area mare precizie simplă Cadru cu laser gravor- NegruAlfawise C30 Pro 3000mw cu laser masina de gravat 460 x 360mm Large Area mare precizie simplă Cadru cu laser gravor- NegruAlfawise C30 Pro 3000mw cu laser masina de gravat 460 x 360mm Large Area mare precizie simplă Cadru cu laser gravor- NegruAlfawise C30 Pro 3000mw cu laser masina de gravat 460 x 360mm Large Area mare precizie simplă Cadru cu laser gravor- NegruAlfawise C30 Pro 3000mw cu laser masina de gravat 460 x 360mm Large Area mare precizie simplă Cadru cu laser gravor- NegruAlfawise C30 Pro 3000mw cu laser masina de gravat 460 x 360mm Large Area mare precizie simplă Cadru cu laser gravor- NegruAlfawise C30 Pro 3000mw cu laser masina de gravat 460 x 360mm Large Area mare precizie simplă Cadru cu laser gravor- NegruAlfawise C30 Pro 3000mw cu laser masina de gravat 460 x 360mm Large Area mare precizie simplă Cadru cu laser gravor- NegruAlfawise C30 Pro 3000mw cu laser masina de gravat 460 x 360mm Large Area mare precizie simplă Cadru cu laser gravor- NegruAlfawise C30 Pro 3000mw cu laser masina de gravat 460 x 360mm Large Area mare precizie simplă Cadru cu laser gravor- NegruAlfawise C30 Pro 3000mw cu laser masina de gravat 460 x 360mm Large Area mare precizie simplă Cadru cu laser gravor- Negru

Credem că vă place

Recenzii de la clienți

4.55 out of 5
  • 6
  • 5
  • 0
  • 0
  • 0
See all 11 reviews Scrieți o recenzie
  • Talor Brook
    Practical
    This is a high power laser engraving machine that allows you to carve patterns on the surface of different materials. Wood, plastic, paper, bamboo, horns, leather, sponge paper, etc. can be engraved with the pattern you want. If you like carving some crafts, this product is a good choice. You can not only enjoy doing it yourself, but also sculpt the shape you want.

    Jan 05,2020

  • John B.
    Sculpt the shape you want
    I just received this engraving machine not long ago. I am very satisfied with the appearance and material, and the workmanship is very fine. The large 550 x 450mm engraving area can meet your various needs, sculpting various shapes you want, such as pen holders, ornaments, etc., and also sculpting dolls for children. You can enjoy the fun of DIY. Recommended!

    Dec 10,2019

  • Michael Field
    Easy to use
    This engraving machine is very easy to use and is equipped with goggles to protect your eyes from laser damage. With instructions, you can complete product installation and get started quickly according to it. When I first used it, I carved a little rabbit for my niece, and she liked it very much. It is very useful for people who like crafts.

    Jan 12,2020

  • Khaleesi
    Meet demand
    This arrived fast and very well packaged thank you. I will use it for the next few days to sculpt many anime characters I always wanted.

    Dec 23,2019

  • Madge
    Good shopping
    Very quick Delivery. Just wish that the instructions use a little bit bigger words. I'm very happy

    Jan 09,2020

Întrebări frecvente pentru Alfawise C30 Pro

  • Why do I have to use goggles?

    Viewing laser engraving without goggles can cause eye discomfort. In addition, in the event of an accident, the laser light will enter the pupil, causing irreparable blinding damage.
  • Why must laser engraving machine have Active Position Protection?

    During the actual operation of the engraving machine, there is a possibility that the laser engraving machine will be carelessly overturned or hit by negligence. If there is no active position protection, the emitted laser may cause damage to human body or property. With active position protection, it can effectively avoid this dangerous situation.
  • Why are the engraving/cutting result of some materials bad?

    Different materials have different engraving / cutting effects depending on the ignition point, light reflectance and light transmittance. All highly reflective and translucent materials must not be engraved or cut directly. And, even with the same material, the darker the color and the higher the absorbance, the better the engraving / cutting effect
  • Can metals such as copper, iron, and aluminum be engraved?

    Uncoated copper, iron, and aluminum cannot be engraved directly, especially copper metal, which has a high reflectivity. If engraved directly, the laser light may even be reflected back to the lens, causing the laser head to burn. In some videos show that copper is engraved. In fact, it engraved on the material which with electroplating copper effect, or the copper with coating. And iron and aluminum are also engraved only when blackened or coated.
  • Is there a limit to the working time of a single engraving / cutting

    If the laser module with good heat dissipation conditions can achieve the thermal balance of the LD light source, theoretically there will be no limitation on the engraving / cutting time.
  • What could be the cause of motor stuck, XY axis not running smopthly, and limit switch not working ?

    They may caused by wire loosen. Please check the wires' connection of motor and limit switch.
  • What could be the cause of computer cannot identify when USB cable is insert to computer?

    It caused by no corresponding driver intalled. Windows XP/7 and Windows 8/10, as well as 64-bit and 86-bit systems, need to install different drivers.
  • What is the function of the LED indicator on the machine?

    The red light is the power indicator, when bright means machine starting, not bright means machine turning off, the fast flash means the power key is pressed, and the slow flash means the machine is in alarm state and needs to be unlocked. The blue light is the USB status indicator light, when bright, the USB cable is connected to the computer and recognized, while the off signal indicates that the USB cable is not connected or the computer is not equipped with the driver, and the flashing signal indicates that the engraved data is being transmitted.
  • Why do some materials need to be coated or painted black for engraving?

    Laminating or black coating is generally an auxiliary measure for transparent or highly reflective materials to ensure that the laser can be absorbed by the target and produce an engraving effect.
  • Why does the laser head suddenly stop emitting light during engraving?

    Generally, it should be the Active Position Protection be activated. The large braking inertia in the turn-back movement of laser head when engraving at high speed, would cause the engraver moving, then causing the Active Position Protection be triggered. The solution is to place the engraver on a flat and stable table, and it is best to fix the engraver on the table with the included angle iron.
  • Can the 2 interfaces of the Y-axis be arbitrarily plugged in?

    This engraving machine uses double Y-axis, double motor transmission, two Y-axis motor interfaces, which can be directly interchangeable, just make sure that the Y-axis interface corresponds to the Y-axis motor interface.
  • What is the engraving area applicable to this section?

    This engraving machine can engrave an area of up to 500mm 450mm, which is more scalable than the 300mm 400mm on the market.
  • What is the power of the laser head supported by this model?

    The machine is free to replace different power laser heads, and can be changed freely between 1600mw-7000mw.
  • Vizualizare mai multe

Întrebări și răspunsuri de la clienți

  • Toate
  • Informațiile produsului
  • Stare stoc
  • Plată
  • Despre expediere
  • Altele

Fiți PRIMUL care adresează o întrebare. Vreți puncte GB? Scrieți o recenzie!

0 Întrebări și răspunsuri Vizualizare tot>

Produse sponsorizate conexe acestui articol

Vrei sa cumperi en gros Alfawise C30 Pro? Trimite cererea ta pentru a cumpara en gros Alfawise C30 Pro. De obicei nu oferim transport gratuit pentru Alfawise C30 Pro en gros, dar reducerile pe care le putem oferi sunt consistente.

Articole vizualizate recent

Consultați recomandările personalizate

Client nou? Începeți aici
Pre-sale Service