All
Cuvinte-cheie produs
Introduceți adresa de e-mail a contului
Setul de imprimante 3D Tevo Tarantula
Share to:

Setul de imprimante 3D Tevo Tarantula

- Negru Plug-in UE
212499202

200 x 200 x 200 mm + Ecran LCD + Duză de 0,4 mm
4.75 104 Recenzii de la clienți | Please refer to English description
264.52
  • TRANSPORT GRATUIT
    COD Plata la livrare este disponibila pentru acest produs (COD). Nota: Pot fi adaugate mai multe produse intr-o singura comanda. Pentru a putea plati la livrare, adauga in cos doar produse cu eticheta COD. Valoarea totala a comenzii trebuie sa fie cuprinsa intre 80 si 400 LEI.
    Expediere între: Oct 21, Timp de expediere estimat: zile lucrătoare Durata de procesare a comenzii poate fi de câteva zile. După livrarea din magazie, durata de expediere (sau livrare) depinde de metoda de expediere.
  • +
  • fără dobândă Puteți beneficia de maximum 0 rate fără dobândă, iar această ofertă nu se aplică atunci când plasați comenzi împreună cu alte produse
;   
Informații taxe Protecția prețului Declinare privind prețurile Repair Warranty Report Item
lichidare

Produse recomandate pentru dvs.

Clienții care au cumpărat acest articol au mai cumpărat

Declinul de responsabilitate: ● Vă rugăm să citiți cu atenție și să urmați manualul de utilizare înainte de asamblarea sau utilizarea imprimantei 3D. ● Modificarea și personalizarea imprimantei 3D sunt strict interzise. Nu ne vom asuma nicio responsabilitate pentru orice probleme care rezultă din modificări. ● Utilizați întotdeauna tensiunea AC corectă pentru regiunea dvs. ● Nu amplasați imprimanta 3D în apropierea materialelor inflamabile / combustibile sau a altor surse de căldură. ● Utilizați imprimanta 3D numai în zone bine ventilate. Mențineți o distanță sigură față de imprimantă.

Setul de imprimante 3D de la Tevo TarantulaCaracteristici principale: ● Zona de imprimare este 200 x 200 x 200 mm ● Extruderul metalic complet (E3D) este foarte tolerant în majoritatea condițiilor de imprimare și este proiectat să accepte marea majoritate a filamentelor de pe piață, temperaturi mai ridicate ● Plăcile din aluminiu anodizate solide sunt fasonate CNC pentru o potrivire precisă, rigiditate extremă ● Ecranul LCD vă oferă informații direct și ușor de manipulat

Specificație

General

Marca: Tevo
Model: tarantulă
Tip: DIY
Zona de gravare: 200 x 200 x 200 mm
Cantitatea duzei: Singur
Diametrul duzei: 0.4mm
Temperatura duzei: Temperatura camerei la 260 grade
Grosimea stratului: 0.05-0.4mm
Card de memorie imprimat offline: card SD
Ecran LCD: da
Viteza de imprimare: 150mm / s
Materiale suport: ABS,PLA flexibil,Nailon,PETG,PLA,PVC,Lemn
Diametrul materialului: 1,75 mm
Limba: Engleză
Tipul fisierului: G-code,STL
Acuratețea poziționării axei XY: 0.012mm
Încercarea de poziționare a axei Z: 0,004mM
Tipul de ambalare: ambalare neamestecată
Suportul sistemului: Windows, Linux, Mac

Dimensiuni și greutate

Greutatea produsului: 7.5000 kg
Greutatea pachetului: 9.3000 kg

Conținutul pachetului

Conținutul ambalajului: 1 x kit de imprimante 3D Tevant Tarantula
2040 Aluminum Extrusion 420mm2
Kits A-71
2040 Aluminum Extrusion 400mm
1
Acrylic for End Stop 2
2020 Aluminum Extrusion 400mm
1
Kits A-81
2020 Aluminum Extrusion 380mm1
X-Carriage Holder
1
Threaded Rods 380mm
1
Kits A-91
Aluminum Wires Holder
3
Acrylic for Main Board
3
2040 Aluminum Extrusion 150mm2
Main Board Base 1.4
1
Acrylic for LCD Display
2
Kits A-101
2004 LCD Display
1
Step Motor
4
Kits A-6
1
Acrylic for Y Axis Front
2

  Acrylic for L Aluminum Connector

2
Kits-B21
Acrylic for Y Axis Black
2
E3d & Cool Fan
1
Kits-B3
1
Gift Kits
1
Acrylic for Y Heat Bed Holder
1
L Aluminum Connector
1
Kits-B4
1
Tools
1
Acrylic for Copper
1
Acrylic for Z Axis Left Holder
1
Kits-B4-1
1
Kits-B7
1
Belt
2
Feeder
1
Wires Protection
1
Motor Holder
1
Acrylic for Z Axis Right Holder
1
Power Supply
1
Kits-B5
1
Tevo Titan Extruder

1

End Stop3
USB Cable1
Step Motor Wire
4
Acrylic for Heat Bed Plate1
Wires of Power Supply
1
Heat Bed1
Heated Bed Cable
1
PTFE Tube

1

Plug
1
Filaments2
Setul de imprimante 3D Tevo Tarantula- Negru Plug-in UE
Setul de imprimante 3D Tevo Tarantula- Negru Plug-in UE
Setul de imprimante 3D Tevo Tarantula- Negru Plug-in UE
Setul de imprimante 3D Tevo Tarantula- Negru Plug-in UE
Setul de imprimante 3D Tevo Tarantula- Negru Plug-in UE
Setul de imprimante 3D Tevo Tarantula- Negru Plug-in UE
Setul de imprimante 3D Tevo Tarantula- Negru Plug-in UE
Setul de imprimante 3D Tevo Tarantula- Negru Plug-in UE
Setul de imprimante 3D Tevo Tarantula- Negru Plug-in UE
Setul de imprimante 3D Tevo Tarantula- Negru Plug-in UE
Setul de imprimante 3D Tevo Tarantula- Negru Plug-in UE
Setul de imprimante 3D Tevo Tarantula- Negru Plug-in UE
Setul de imprimante 3D Tevo Tarantula- Negru Plug-in UE
Setul de imprimante 3D Tevo Tarantula- Negru Plug-in UE
Setul de imprimante 3D Tevo Tarantula- Negru Plug-in UE

Credem că vă place

Recenzii de la clienți

4.75 out of 5
  • 78
  • 26
  • 0
  • 0
  • 0
See all 104 reviews Scrieți o recenzie
  • mr tech therapy
    Da (0) Culoare: Black Dimensiune: EU Plug
    tevo tarantula 3D printer
    This 3D printer is very good for i'ts price.
    Advantages :
    First this 3D printer reaches the hight temperatures fast and easily.
    It's extruder is awesome and you can use a wide variety of fillaments!!!
    The 3D prints that i have already make are very good and have very good quality.
    One more advantage is that when it prints something it quiet enough that i can print things in any time i want without making a lot of noise.
    Disadvantages :
    The maine disadvantage is tha the extruder sometimes gets stuck with filament and it doesn't print if it stucks,so you have to make the print again.(if you make slower the motor of the extruder it's ok)
    The second disadvantage is tha it needs some extra upgrades.(ordering 2 extra fans and printing some piaces for more strength)

    In conclusion if you are new in 3D printing and have a budget at 200$ this is the best choise for you!!!!!
    If you are intrested more about 3D printers just wait a little bit and collect more monay so you can buy a better but more expensive 3D printer

    Oct 29,2018

  • Devil231
    Da (1) Culoare: Black Dimensiune: EU Plug
    Good printer
    The printer is good as long as you take your time to assemble and tweak it.
    Also the price is low and the shipping is fast if you choose priority shipping (the courier will bring it at your door).
    It comes with two rolls of filament of 0.25kg each (the colors and material are sent randomly but you'll likely get PLA).
    You can find a lot of videos on how to assemble, calibrate or change the firmware of the printer.
    Also there is an official facebook group from where you can get a lot of help.
    Overall if you're on a budget and you don't mind tweaking or printing some parts you can't go wrong with Tevo Tarantula.
    Also there are some cons that I have mentioned in this review
    Suggestion
    First of all:
    Get rid of the included SD Card! (See the pictures) - It will corrupt each and every file written on it.
    Buy a lot of M4/M5 washers otherwise you risk to crack the acrylic!
    Take your time to assemble it and tweak it!
    Take your time to learn how the eccentric nuts works!
    Buy ferrules!
    You need to buy some plugs, washers, fans... so if you're on a budget you will have to include the cost of them.

    Mar 17,2018

  • Alfredo Espinoza
    Da (1) Culoare: Black Dimensiune: US Plug
    Better than a friends 3d printer
    Because of the price and the quality ofthe print compared with other printers
    What a i disliked the most was that the lcd that came with it was not working properly, but got one easily and that was it, what i like the most is the printing quality.
    The advantage is the price, although you will have to work on the printer to print at high speed with reasonable quality.
    The one thing I recomend is that if you are going to buy this printer, you are willing to read manuals, do some research and spend some more on add ons, but I believe is worth it. This is a printer for engineers and technitians,
    Suggestion
    Just for some people it might be a burden that it has to be assembled

    Apr 06,2018

  • Eduard
    Da (1) Culoare: Black Dimensiune: EU Plug
    Great product for best price!
    It came earlier then expected (almost 1 month) and through a private courier rather then the postal customs so i had no difficulties with receiving the package (in Romania the customs officers are a real pain in the a...).
    Packing was incredibly organized and everything labeled properly.
    Quality is great especially for this price.
    It came with 2 spools of PLA filament of 0.2KG each and it's somehow gradient (i'm not sure about this term) and it changes the color as you use more of it (it can be seen in the photos down below).
    Suggestion
    Terrible manual that skips important steps and confuses you rather then help you go easily through the building process.
    The acrylic bed carriage has the large holes rather larger then it should and i had to watch a step by step tutorial to see how to properly fix the calibration of the wheels because it would wooble terribly.
    No spatula to remove item from print bed.
    No grease for the rod.
    Stock firmware MUST be upgraded (i downloaded the Tevo-Tarantula-Marlin-1.1-RC7-BugFix--master after googling solutions for firmware upgrade).

    Feb 11,2018

  • Darek
    Da (1) Culoare: Black Dimensiune: EU Plug
    DW
    It's my second DIY printer and I was surprised this time that all parts were prepared in their bags for each step.
    Installation was very easy, that's 2017 updated version and both, old and new Tevo Titan extruders were in the package. Of course two smokey filament spools were inside.
    I can't stop smiling watching how beautiful prints come from this printer.
    Great price, can upgrade it with longer aluminium profiles....what can I say more.
    Thank you for fast shipping and great product.
    Suggestion
    Great packaging, nothing to add to improve. Realli nice DIY set.

    Dec 23,2017

Întrebări și răspunsuri de la clienți

  • Toate
  • Informațiile produsului
  • Stare stoc
  • Plată
  • Despre expediere
  • Altele

Fiți PRIMUL care adresează o întrebare. Vreți puncte GB? Scrieți o recenzie!

Fiți PRIMUL care adresează o întrebare. Vreți puncte GB? Scrieți o recenzie!

Fiți PRIMUL care adresează o întrebare. Vreți puncte GB? Scrieți o recenzie!

Fiți PRIMUL care adresează o întrebare. Vreți puncte GB? Scrieți o recenzie!

Fiți PRIMUL care adresează o întrebare. Vreți puncte GB? Scrieți o recenzie!

Fiți PRIMUL care adresează o întrebare. Vreți puncte GB? Scrieți o recenzie!

0 Întrebări și răspunsuri Vizualizare tot>

Produse sponsorizate conexe acestui articol

Articole vizualizate recent

Consultați recomandările personalizate

Client nou? Începeți aici
Pre-sale Service