Toate
Cuvinte-cheie produs
Introduceți adresa de e-mail a contului
Imprimanta 3D Desktop Tronxy X1
Share to:

Imprimanta 3D Desktop Tronxy X1

- Gun Metal Plug-in UE
199489103

Suport card SD Card off-line + afișaj LCD + Precizie ridicată 0,1 - 0,4 mm
4.69 87 Recenzii de la clienți | Please refer to English description
168.55
  • TRANSPORT GRATUIT
    COD Plata la livrare este disponibila pentru acest produs (COD). Nota: Pot fi adaugate mai multe produse intr-o singura comanda. Pentru a putea plati la livrare, adauga in cos doar produse cu eticheta COD. Valoarea totala a comenzii trebuie sa fie cuprinsa intre 80 si 400 LEI.
    Expediere între: Jan 30 - Feb 01, Timp de expediere estimat: zile lucrătoare Durata de procesare a comenzii poate fi de câteva zile. După livrarea din magazie, durata de expediere (sau livrare) depinde de metoda de expediere.
  • +
  • fără dobândă Puteți beneficia de maximum 0 rate fără dobândă, iar această ofertă nu se aplică atunci când plasați comenzi împreună cu alte produse
Informații taxe Protecția prețului Declinare privind prețurile Repair Warranty Report Item
lichidare
Produse recomandate pentru dvs.
Clienții care au cumpărat acest articol au mai cumpărat

Tronxy X1 Descrieri

Disclaimer:
●Citiți și urmați cu atenție manualul de utilizare înainte de a asambla sau utiliza imprimanta 3D.
●Modificarea și personalizarea imprimantei 3D sunt strict interzise. Nu ne vom asuma nici o responsabilitate pentru orice probleme care rezultă din modificări.
●Utilizați întotdeauna tensiunea corectă AC pentru regiunea dvs.
●Nu amplasați imprimanta 3D în apropierea materialelor inflamabile / combustibile sau a altor surse de căldură.
●Utilizați imprimanta 3D numai în zone bine ventilate. Mențineți o distanță sigură față de imprimantă.

Imprimanta 3D de pe ecranul LCD Tronxy X1

Descriere:
Această imprimantă 3D areVolum de construcție 150 x 150 mm x 150 mm,Diametrul duzei de 0,4 mm. Este fabricat din aluminiu.

Caracteristici principale:
●SprijinăCard de imprimare off-line pentru cardul SD, mai ales convenabil atunci când nu există un computer
Rezoluția stratului de 0,1 - 0,4 mm, precizie ridicata
●Volum de construcție 150 x 150 mm x 150 mm
Rezoluția stratului de 0,1 - 0,5 mm accelerează procesul de proiectare
ecran LCD afișează informațiile dvs. de imprimare direct și ușor pentru manipulare
●Enhanced stability and reliability: plăcuță acrilică asigură o imprimare mai stabilă
●Sprijină3D printing filaments: PLA, ABS
●Operating system: Windows XP / 7 / Mac

Specificație

General

Marca: Tronxy
Tip: Mașina completă
Zona de gravare: 150 x 150 mm x 150 mm
Cantitatea duzei: Singur
Diametrul duzei: 0.4mm
Card de memorie imprimat offline: card SD
Ecran LCD: da
Materiale suport: PLA
Diametrul materialului: 1,75 mm
Acuratețea poziționării axei XY: 0.012mm
Încercarea de poziționare a axei Z: 0,004mM
Tipul de ambalare: ambalare neamestecată
Certificat: CE,FCC,RoHs

Dimensiuni și greutate

Greutatea produsului: 3,5000 kg
Greutatea pachetului: 4,8200 kg
Mărimea produsului: 34,00 x 36,50 x 35,00 cm / 13,39 x 14,37 x 13,78 țoli

Conținutul ambalajului

Conținutul ambalajului: 1 x Imprimanta 3D Desktop
Imprimanta 3D Desktop Tronxy X1- Gun Metal Plug-in UE
Imprimanta 3D Desktop Tronxy X1- Gun Metal Plug-in UE
Imprimanta 3D Desktop Tronxy X1- Gun Metal Plug-in UE
Imprimanta 3D Desktop Tronxy X1- Gun Metal Plug-in UE
Imprimanta 3D Desktop Tronxy X1- Gun Metal Plug-in UE

Credem că vă place

Recenzii de la clienți

4.69 out of 5
  • 65
  • 19
  • 2
  • 0
  • 1
See all 87 reviews Scrieți o recenzie
  • Jasen
    Da (2) Culoare: Gun Metal Dimensiune: US Plug
    Great starter printer
    I saw this printer reviewed on YouTube and decided to get one. It's not my first 3d printer ( I have a scratch built delta and had a prusa i3 clone that I scavenged to make the delta). I decided to get this printer to see what modern kits were like.

    it's really easy to assemble. I like V-rail. I use it in my workshop to make jigs and I have a CNC that I scratch-built from it.

    The Tronxy kit works just like the YouTube videos say it does. it's cheap and easy (and fast) to build. There are a few shortcomings, but with a little work, you can get a reliable printer for a very nice price.

    I have had very few failed prints (all while trying to print over USB), but I am experienced with printing. I've printed about 2kg of PLA with mine now...
    Suggestion
    There is a design flaw in the gantry plate that makes the gantry too loose. I fixed it with a metal file.
    The Y carriage assembly was loose, but I was able to just tighten the wheels so it gripped the v-rail.

    most importantly, I received a bad power supply that melted itself. I will try to attach pictures. I didn't like how hot the power brick was getting, so I never left the printer unattended... good thing, the connector melted into the acrylic and the brick itself started to melt. I've since replaced the brick with a larger 12v 360w power supply that I had left from my old i3 clone, and used some anderson powerpole connectors (rated to 20 amps) overkill, I know, but it's what I had.

    the last con, though a small one, the print volume is... small... about a 6" cube. (14cm)... a little less actually. but if you just want to print some little PLA things and get into the world of 3d printing to see if it's for you, that's not a big deal.

    Apr 05,2018

  • Caverntwo
    Da (4) Culoare: Gun Metal Dimensiune: EU Plug
    A Small but Good 3D-Printer
    The printer arrived well packaged. The included SD-card contains a very good manual. No wiring of mains electricity is needed due to a closed PSU. The printer prints very nicely and accurate with no layer offset. The extruder and hot-end are very well-designed, already utilizing the Bowden-setup. Furthermore, the controller has outputs for both a heated bed as well as a part cooling fan, and the aluminum extrusions are of the European standard 2020 and 2040, allowing for possible future size upgrades (at least along the y- and z-axis). My printer arrived with 10m of black sample PLA.
    Suggestion
    The most negative point of the build is the incomplete set of screws. In my case, the package lacked 8 plastic spacers, some 8mm M3 screws as well as a T-nut. Luckily, I could substitute all the missing parts. Furthermore, the printer has a lot of play, especially on the y-axis, which can luckily be fixed with some upgrades. The SD-card is not easily reachable, with an SD-extension cable helping a lot.

    May 07,2017

  • Mark sawdon
    Da (0) Culoare: Gun Metal Dimensiune: US Plug
    tronxy x1
    pros: kit build teaches newer users how it works. operation is easy to understand. size is perfect for beginners. cost is excellent for starting into 3d printing without breaking the bank.

    cons: wobble in x axis was slightly difficult to overcome at first without access to 3d printed upgrades.. but with help of facebook community for tronxy x1, I was able to overcome in a few days. print the upgrades, it will teach you a lot about how it works.
    Suggestion
    the tronxy x1 is a great starter kit for a novice getting into 3d printing. building it from a kit allows you to physically see how things come together and work and helps you in trouble shooting any issues later. you will want to print upgrades to this machine, and each will be a lesson about functionality of the device. I've had my machine for 7 months now and love it, I've already ordered another larger printer to work along side this one.. my kids and wife like being able to print on this too. Facebook has a tronxy x1 group that is very knowledgeable and friendly when it comes to answering questions and helping fellow users.. I hope to see you there and help you as they helped me... would definitely buy this all over again.. a great introduction to 3d printing.

    Aug 07,2018

  • Pieter
    Da (0) Culoare: Gun Metal Dimensiune: EU Plug
    It works!
    This is a great little machine, I build it in 3 hours. Order of operations where sometimes “wrong” in the manual but still better than what I’ve heard of many other machines. This is my first 3D printer and it was very doable! One complaint that I do have is that the pla that came with it was in 100 very small pieces thus not useable! But you do have to order your own anyways. Great little machine overall it’s printing right as I speak!
    Suggestion
    Filament was broken

    Aug 11,2018

  • Sylvain
    Da (0) Culoare: Gun Metal Dimensiune: EU Plug
    Most affordable but decent 3D printer
    Great value fro the price, if you are not afraid to spend time and have to tinker a little bit.
    Nice first 3D printer, that may indeed be enough to fill your needs, or at least allow you to learn 3D printing at a budget before you get a bigger, more expensive printer.
    I needed an afternoon to put it together, however I lost time because of some little hardware issues.
    Assembly is not all, after it you need to do tests and settings tweaking, it will keep you busy for a few more hours !
    Suggestion
    All the thingsI notice and that could be improved:
    The assembly instructions do not tell at all how to deal with the wire looms. There is not enough spiral cable sleeve provided, luckily I had some in stock (they should provide twice the amount, at least).
    Some small hardware issues like a missing screw and a butterfly nut that was NOT THREADED. Nothing too terrible if you have a stock of random screws and hardware.
    Pro tip: loose set screws on a belt pulley will give you a headache, make sure they are tight.
    The quality of the filament sample provided was catastrophic, the first test print ended in a shapeless blob of plastic... luckily things went a lot better with an other filament, still some tests and tuning to do but I printed my first half decent calibration cube.

    Jan 13,2018

Întrebări și răspunsuri de la clienți

  • Toate
  • Informațiile produsului
  • Stare stoc
  • Plată
  • Despre expediere
  • Altele

Fiți PRIMUL care adresează o întrebare. Vreți puncte GB? Scrieți o recenzie!

0 Întrebări și răspunsuri Vizualizare tot>

Produse sponsorizate conexe acestui articol

Vrei sa cumperi en gros Tronxy X1? Trimite cererea ta pentru a cumpara en gros Tronxy X1. De obicei nu oferim transport gratuit pentru Tronxy X1 en gros, dar reducerile pe care le putem oferi sunt consistente.

Articole vizualizate recent

Consultați recomandările personalizate

Client nou? Începeți aici
Pre-sale Service