Toate
Cuvinte-cheie produs
Introduceți adresa de e-mail a contului
Geeetech A10M Mix-color Imprimanta 3D
Share to:

Geeetech A10M Mix-color Imprimanta 3D

- Dodger Blue US Plug (3 pini)
275910003

Se amestecă-culoare de imprimare, 220 x 220 x 260mm Dimensiune imprimare, usor de asamblat, separări reluarea Capability
4.63 19 Recenzii de la clienți | Please refer to English description
340.94 $356.99 4% reducere
  • TRANSPORT GRATUIT
    COD Plata la livrare este disponibila pentru acest produs (COD). Nota: Pot fi adaugate mai multe produse intr-o singura comanda. Pentru a putea plati la livrare, adauga in cos doar produse cu eticheta COD. Valoarea totala a comenzii trebuie sa fie cuprinsa intre 80 si 400 LEI.
    Expediere între: Feb 03 - Feb 05, Timp de expediere estimat: zile lucrătoare Durata de procesare a comenzii poate fi de câteva zile. După livrarea din magazie, durata de expediere (sau livrare) depinde de metoda de expediere.
  • +
  • fără dobândă Puteți beneficia de maximum 0 rate fără dobândă, iar această ofertă nu se aplică atunci când plasați comenzi împreună cu alte produse
Informații taxe Protecția prețului Declinare privind prețurile Repair Warranty Report Item
lichidare
Produse recomandate pentru dvs.
Clienții care au cumpărat acest articol au mai cumpărat

Descrieri

Caracteristici principale:
● 2 în 1 imprimarea color din amestec
● Detector Filament
● capacitatea de rupere-reluare
● Design modular pentru asamblare ușoară
● Extruderul adoptă 360 de grade de proiectare de ventilație, care are o buna disipare a căldurii și de imprimare de calitate
● Funcția de repornire One-clic
● kit de nivelare automată poate fi selectată pentru nivelare automată (trebuie să achiziționați separat 3D touch)
● Open source placa de baza firmware

Specificație

General

Marca: Geeetech
Model: A10M
Tip: DIY
Material (Rame): Extrudare din aluminiu
Placă de platformă: Baza aluminiu
Cantitatea duzei: Singur
Diametrul duzei: 0.4mm
Dimensiunea formării produsului: 220 * 220 * 260mm
Grosimea stratului: 0.1-0.2mm
Card de memorie imprimat offline: Cartela TF
Viteza de imprimare: 60mm / s
Materiale suport: ABS,PLA
Diametrul materialului: 1,75 mm
Limba: chinez,Engleză
Tipul fisierului: G-code,STL
Funcția de suport a modelului: da
Voltaj: 110-240V
Puterea de lucru: Intrare: 115 / 230V AC 50 / 60Hz Output: DC24V-15A Max 360W
Software pentru gazde gazdă: Cura,Repetier-gazdă
Tipul de ambalare: Ambalaj asamblat
Tip conector: USB

Dimensiuni și greutate

Greutatea produsului: 7,9000 kg
Greutatea pachetului: 9,9000 kg
Dimensiunea produsului (L x W x H): 47,80 x 41,30 x 48,50 cm / 18,82 x 16,26 x 19,09 țoli
Dimensiunea ambalajului (L x L x Î): 53.00 x 47.00 x 23.00 cm / 20.87 x 18,5 x 9,06 inchi

Conținutul pachetului

Conținutul ambalajului: 1 x imprimanta 3D

Geeetech A10M Mix-color Imprimanta 3D- Dodger Blue US Plug (3 pini)

Geeetech A10M Mix-color Imprimanta 3D- Dodger Blue US Plug (3 pini)

Geeetech A10M Mix-color Imprimanta 3D- Dodger Blue US Plug (3 pini)

Geeetech A10M Mix-color Imprimanta 3D- Dodger Blue US Plug (3 pini)


Credem că vă place

Recenzii de la clienți

4.63 out of 5
  • 14
  • 4
  • 0
  • 1
  • 0
See all 19 reviews Scrieți o recenzie
  • Josh
    Great printer for the print and even newbies
    So im new to the 3d printing world and this is my first printer had it about 2/3 month now.

    first off a few reviews say this printer isn't ideal for first timers I would disagree as for me it worked well from day one got reasonable prints from it (not perfect but I wasnt expecting to) out of the box (after bed levelling) once I got into to it and sorted out other issues and did some calibrations it works incredibly well and quite reliably too.

    I found I enjoyed sorting issues out with the printer as i good bit of a sense of achievement, biggest lesson i have learnt however pick you filaments carefully, one of my first filaments was a nightmare to printer with and i thought it was the printer but once i change that it was a dream to print with i would recommend sticking with Geeetech filament to start with as it works well with there printer and a is quite forgiving

    so its easy to set up out the box runs well great for learning how to print and trouble shoot on too, a huge plus for me also is the community on Facebook for Geeetech is amazing any issues no matter how basic or silly it may seem they will help you out and every one is nice there too, which helped me loads when I first started.

    once you have the basics this printer serves well as it has the option to mix colour (i.e red and white and make pink filament) or have different layer colours (saves painting) all of this is more of advance thing but you have it ready once you, and mixed prints seem to be a popular thing at the moment so if you can jump on the band wagon now you can get ahead of the game slightly to.

    if you looking for a new hobby dont want to spend the earth to do it and have the time to learn how to run this then Geeetech A10M is a good shout

    Jan 15,2019

  • Misiek
    A10m good
    A10M very good printer for ppl who know how to use it. i would not recomend it as a first printer. but for the second when you know something about 3d printers. For me marlin 1.1.9 is must have for this printer. . Good quality of product simple to build. parts are very acurated. bed can reach 100 celcius very fast so you can easly print from abs.
    And most important dont leave second bowden empty best way is to mount the same filament in both extruder and set mixing to 98:2% (if you print one colour). if you leave one bowden empty filament from another bowden will flow to your empty bowden.

    Mar 13,2019

  • Dave
    Best 3D Printer for the price - biggest bang for the buck
    Pros:
    - great price value
    - DIY Assembly was as easy as 123.
    - the quality of the components is very good considering the low price
    - the print quality is quite impressive
    - it is capable of handling pretty well all of the materials on the market with its heated bed

    Cons:
    - the glass build plate that came with the unit is not flat! I do not know how somone can produce plate glass without it being flat but there are high and low spots +- 1.5 mm!

    Jan 03,2019

  • Alex
    Geeetech A10M Review
    First, GearBest service great

    Excellent printer, surprisingly very good quality.
    Pros:
    - Good Quality materials
    - 24v fast heating
    - Good stability
    - Extras: Glass plate, comes with filament runout sensors for both extruders.
    - Boot loader
    - Dual extruder, great potencial in mixin colors and degradation (see pictures).
    - Low price
    Cons:
    - Littlebit hard to configure for dual extrution, posible not for beginers.
    - Flat cable for display, higth posibilities to fail.
    - No community found for these printer yet.
    - Software dont include mixin options.

    Jan 22,2019

  • Marco
    Funktioniert nach etwas Basteln einwandfrei
    Das Preis-Leistungs-Verhältnis ist meiner Meinung nach nicht zu toppen.

    + sehr stabil
    + kurze Montage von etwa 30 Minuten
    + selbsterklärendes Menü
    + "Ecken anfahren" zum Leveln

    - Filamentführung am Sensor nicht optimal, erste Drucke unbrauchbar.
    - Sehr knappes Manual in Papierform
    - nichts auf SD-Karte beigelegt außer 3 Probedrucke

    Nach etwas grübeln und optimieren ein toller Drucker!

    Oct 12,2018

Întrebări și răspunsuri de la clienți

  • Toate
  • Informațiile produsului
  • Stare stoc
  • Plată
  • Despre expediere
  • Altele

Fiți PRIMUL care adresează o întrebare. Vreți puncte GB? Scrieți o recenzie!

0 Întrebări și răspunsuri Vizualizare tot>

Produse sponsorizate conexe acestui articol

Vrei sa cumperi en gros ? Trimite cererea ta pentru a cumpara en gros . De obicei nu oferim transport gratuit pentru en gros, dar reducerile pe care le putem oferi sunt consistente.

Articole vizualizate recent

Consultați recomandările personalizate

Client nou? Începeți aici
Pre-sale Service