All
Cuvinte-cheie produs
Introduceți adresa de e-mail a contului
Anycubic MEGA Full Metal Frame Imprimantă 3D FDM
Share to:

Anycubic MEGA Full Metal Frame Imprimantă 3D FDM

- Noapte Plug-in UE
212977906

4.7 103 Recenzii de la clienți | Please refer to English description
441.59
  • TRANSPORT GRATUIT
    COD Plata la livrare este disponibila pentru acest produs (COD). Nota: Pot fi adaugate mai multe produse intr-o singura comanda. Pentru a putea plati la livrare, adauga in cos doar produse cu eticheta COD. Valoarea totala a comenzii trebuie sa fie cuprinsa intre 80 si 400 LEI.
    Expediere între: Sep 30 - Oct 02, Timp de expediere estimat: zile lucrătoare Durata de procesare a comenzii poate fi de câteva zile. După livrarea din magazie, durata de expediere (sau livrare) depinde de metoda de expediere.
  • +
  • fără dobândă Puteți beneficia de maximum 0 rate fără dobândă, iar această ofertă nu se aplică atunci când plasați comenzi împreună cu alte produse
;   
Informații taxe Protecția prețului Declinare privind prețurile Repair Warranty Report Item
lichidare

Produse recomandate pentru dvs.

Clienții care au cumpărat acest articol au mai cumpărat

Caracteristici principale
● Rama metalică rigidă, poate reduce mișcarea corpului în timpul tipăririi și poate îmbunătăți calitatea imprimării
● Întrerupătoare de limită Double Z, aduce mai multă precizie pentru nivelare și rezolvă problema axei X.
● Asamblarea rapidă, fiecare imprimantă a fost testată timp de peste 24 de ore înainte de expediere. Trebuie doar să instalați 8 șuruburi și să conectați 3 fire înainte de prima imprimare
● Ecran tactil sensibil, color, multi-lingvistic, ușor de utilizat
● Platformă de imprimare ANYCUBIC, adeziv puternic atunci când platforma este fierbinte și ușor de îndepărtat atunci când se răcește
● Reluare pierdere de putere, fără griji de accident de pierdere de putere. O cheie pentru a relua în cazul imprimării la jumătatea drumului
● Senzor de filament, avertizare automată dacă filamentul se scurge sau se rupe. Inteligența contribuie la economisirea timpului și a filamentelor
● Volum mare de construire, volum mai mare de construire în cadrul aceleiași dimensiuni ale mașinii

Specificație

General

Marca: Anycubic
Model: Anycubic i3 Mega
Tip: DIY
Material (Rame): Extrudare din aluminiu
Placă de platformă: Aluminum Alloy + Glass
Cantitatea duzei: Singur
Diametrul duzei: 0.4mm
Temperatura duzei: Temperatura camerei la 260 grade
Dimensiunea formării produsului: 210 x 210 x 205 mm
Grosimea stratului: 0.1-0.4mm
Card de memorie imprimat offline: card SD
Ecran LCD: da
Viteza de imprimare: 100 mm / s (max.)
Temperatura platformei: Temperatura camerei la 100 de grade
Materiale suport: ABS,HIPS,PLA,Lemn
Diametrul materialului: 1,75 mm
Tipul fisierului: G-code
Acuratețea poziționării axei XY: 0.0125mm
Încercarea de poziționare a axei Z: 0,002 mm
Voltaj: 110V / 220V
Puterea de lucru: AC 110/220 V 50/60 Hz
Software pentru gazde gazdă: GRBL (CNC)
Tipul de ambalare: Ambalaj asamblat
Tip conector: USB,Wifi

Dimensiuni și greutate

Greutatea produsului: 11.0000 kg
Greutatea pachetului: 14.6000 kg
Dimensiunea produsului (L x W x H): 41,00 x 40,50 x 45,30 cm / 16,14 x 15,94 x 17,83 țoli
Dimensiunea ambalajului (L x L x Î): 54,50 x 50,50 x 25,50 cm / 21,46 x 19,88 x 10,04 țoli

Conținutul pachetului

Conținutul ambalajului: 1 x imprimanta 3D, 1 x set de accesorii

Anycubic MEGA Full Metal Frame Imprimantă 3D FDM- Noapte Plug-in UE

Anycubic MEGA Full Metal Frame Imprimantă 3D FDM- Noapte Plug-in UE

Anycubic MEGA Full Metal Frame Imprimantă 3D FDM- Noapte Plug-in UE

Anycubic MEGA Full Metal Frame Imprimantă 3D FDM- Noapte Plug-in UE

Anycubic MEGA Full Metal Frame Imprimantă 3D FDM- Noapte Plug-in UE

Anycubic MEGA Full Metal Frame Imprimantă 3D FDM- Noapte Plug-in UE

Anycubic MEGA Full Metal Frame Imprimantă 3D FDM- Noapte Plug-in UE

Anycubic MEGA Full Metal Frame Imprimantă 3D FDM- Noapte Plug-in UE

Anycubic MEGA Full Metal Frame Imprimantă 3D FDM- Noapte Plug-in UE

Anycubic MEGA Full Metal Frame Imprimantă 3D FDM- Noapte Plug-in UE

Anycubic MEGA Full Metal Frame Imprimantă 3D FDM- Noapte Plug-in UE

Anycubic MEGA Full Metal Frame Imprimantă 3D FDM- Noapte Plug-in UE

Anycubic MEGA Full Metal Frame Imprimantă 3D FDM- Noapte Plug-in UE

Anycubic MEGA Full Metal Frame Imprimantă 3D FDM- Noapte Plug-in UE


Credem că vă place

Recenzii de la clienți

4.7 out of 5
  • 77
  • 23
  • 2
  • 0
  • 1
See all 103 reviews Scrieți o recenzie
  • Dirk
    great printer "out of the box"
    Absolute fantastic 3D printer, 8 screws, 3 connectors, 4 screws for bed leveling and you are done. Very easy to build up. 1st printer that is almost printable out of the box. the 1st print was the pair of oils that are on the SD card. Perfect print.
    I build up 3 different china 3D printer before, all had bin kits and I needed 5 to 6 hours to build up and a lot of tweaking and add ones to print.
    the Anycubic i3 Mega is a perfect fast stetting up printer that owns the "print out of the box" status.
    In the package is a lot of useful tools , like screwdrivers etc, a 2nd complete spare Hotend, a spare switch with mounting option for the endstops. You also find 1 kg of PLA in the box. My 1st personal print with 8,5 h over night was also absolute great.
    I would say price fits for the good quality you get.
    Perfect printer for people that starts with the 3D printing hobby and do not like to learn the hard way how to build a 3D Printer. Also great printer for everybody how wants to print out of the box.
    Next Tests will be, ABS, Wood and flex filament, but maybe the flex could be a bit difficult, because its not a direct extruder (the extruder is mounted on the frame and not above the hotend).
    Suggestion
    I haven`t found anything negative so far. May the y-axis the the hotbed drives on 2 linear rods, thats great, but in the left side is 1 linear ball-bearing and on the right side are 2, why not 2 on both sides?

    Sep 05,2017

  • Roberto
    It could have been better
    nothing to say about shipping and packaging (gearbest ok +++++), but the problem was in the printer, arrived with wiring not well connected and more serious with the nozzle with the decentralized hole, thank goodness that there was a hot end of replacement from where I then took the nozzle, 10 days later I left the power supply, I managed to restart it by changing the fan but after a few days it stopped altogether.
    I wrote to Anycubic that has a nice support group, and within 15 days a nice new power supply came from China.
    despite the initial problems are 3 months that I print without problems, the quality is excellent, I knew it was a very good printer, but I was surprised by the details of incredible details (we are talking about a € 300 printer), you have no problems adhesion because the ultrabase plate is excellent
    would I recommend it? of course.
    Suggestion
    nothing to say about shipping and packaging (gearbest ok +++++), but the problem was in the printer, arrived with wiring not well connected and more serious with the nozzle with the decentralized hole, thank goodness that there was a hot end of replacement from where I then took the nozzle, 10 days later I left the power supply, I managed to restart it by changing the fan but after a few days it stopped altogether.
    I wrote to Anycubic that has a nice support group, and within 15 days a nice new power supply came from China.
    despite the initial problems are 3 months that I print without problems, the quality is excellent, I knew it was a very good printer, but I was surprised by the details of incredible details (we are talking about a € 300 printer), you have no problems adhesion because the ultrabase plate is excellent
    would I recommend it? of course.

    Jun 12,2018

  • DH
    Awesome!
    It took 15 mins to assemble, level and have my first print underway. The components are also very good quality and the overall assembly is very neat, the thing is built like a tank so is incredibly sturdy. No failed prints so far and they've all come out looking great. The version shipped to me was the ultrabase version (composite heat bed) so did not come with bed leveling sensor nor the bed leveling features in the software. However, manual leveling was very straightforward and i've only had to do this once so far. Bed adhesion is amazing! i've not had to use any glue sticks etc so worth the trade in bed level sensor in my opnion. Its also by far the quietest printer i've ever owned! the printer also comes with filament sensor, a spare hot end, metal spatula, tools and 1 Kg roll of filament.
    Suggestion
    Ermmm... its heavy, better have a strong desk to put it on!

    Aug 21,2017

  • Toremmont
    Imprimante 3d
    C'est ma première expérience chez Gearbest et ma première imprimantre 3D. La reception a été rapide et sans problème, le produit trés bien emballé.
    Le montage rapide et sans difficulté, en moins d'une heure je lançais ma première impression (fichier fournit dans la carte mémoire).
    La prise en main a donc été très rapide,.
    La carcasse de l'imprimamnte est entièrement en acier, les guides et vis de guidages semblent de bonnes factures. des pièces de rechanges et les outils nécessaires sont compris dans le poackage, ainsi qu'une bobine de 1kg de PLA.
    Je n'ai pas encore utilisé l'imprimante en connexion USB (pas indispensable) et ne peut donc pas me prononcer sur ce sujet. Je n'ai pas non plus essayé les fonction de reprises après coupure.
    Trés satisfait de mon achat et des premières expériences d'impression.

    Sep 18,2018

  • stefan
    easy start, high quality outcome
    * Easy to assemble and operate (with some technical background, of cause)
    * Very solid construction causes good quality prints.
    * Started the first print 60 minutes after my doorbell rang, well I prepared myself by some videos on the internet
    * The manual is in English. There are lots of pictures. It is very helpful and explains everything
    * Everything needed (really everything, including tools) is included in the delivered box (which has a size, and a weight!)
    * Never had a single broken print with the included black PLA filament. All printing parameters are written in the manual.
    * Less than 10 percent broken prints with Verbatim ABS, probably due to temperature variations in my room (sunshine).
    Suggestion
    * Bed levelling is tricky, but not to complicated
    * Looks like the bed is not completely flat, this does no harm in my case.
    * The filament spool holder looks good but has a rather thin axis with no bearings. It works, but there are millions of constructions for spool holders on the internet.

    Apr 30,2018

Întrebări și răspunsuri de la clienți

  • Toate
  • Informațiile produsului
  • Stare stoc
  • Plată
  • Despre expediere
  • Altele

Fiți PRIMUL care adresează o întrebare. Vreți puncte GB? Scrieți o recenzie!

Fiți PRIMUL care adresează o întrebare. Vreți puncte GB? Scrieți o recenzie!

Fiți PRIMUL care adresează o întrebare. Vreți puncte GB? Scrieți o recenzie!

Fiți PRIMUL care adresează o întrebare. Vreți puncte GB? Scrieți o recenzie!

Fiți PRIMUL care adresează o întrebare. Vreți puncte GB? Scrieți o recenzie!

Fiți PRIMUL care adresează o întrebare. Vreți puncte GB? Scrieți o recenzie!

0 Întrebări și răspunsuri Vizualizare tot>

Produse sponsorizate conexe acestui articol

Articole vizualizate recent

Consultați recomandările personalizate

Client nou? Începeți aici
Pre-sale Service